Automatic Hot Stamping and Die Cutting Machine
Automatic stamping machines are commonly used for general packaging, such as label hot stamping, card hot stamping, food packaging hot stamping, etc.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Automatic Foil Stamping&Die-Cutting Machine EcooGraphix TDS790
For Foil Stamping,Embossing and Die Cutting
Automatic stamping machines are commonly used for general packaging, such as label hot stamping, card hot stamping, food packaging hot stamping, etc.
The automatic stamping machine TDS790 is one of the best-selling products, especially in Europe. Such as the UK, Hungary,Romania, Croatia, Portugal, Bulgaria, and the Czech Republic.
TDS790 automatic hot foil printing machine is a very stable machine, and its first version was designed 20 years ago. So far we have sold more than 300 automatic stamping machines worldwide.
It is used for automatic stamping roll material, after printing, lamination. Suitable for the production of paper boxes, paper cups, wrapping labels, cardboard embossing, portable paper bags, paper covers, PVC, various plastics, etc....
1. Main Features:
1) Transmission of main unit adopts the imported A/C frequency converter control, start-up and stop of the machine are controlled by means of imported air clutch.
2) Running of the whole machine is controlled by PLC. Through the interface touch-screen monitoring the machine running condition,trouble indications and their corresponding solving ways, the operation is more user-friendly.
3) Independent temperature control to each heating zone makes operation temperature of the machine more equal and stable.Function of timing pre-heating can enhance working efficiency greatly.
4) With CE certification .
2. Specifications:
Model | TDS790 |
Max. Sheet size(mm) | 790x560 |
Min. Sheet size(mm) | 310x210 |
Max. Die cutting size(mm) | 760x520 |
Max. Stamping size(mm) | 760x525 |
Inside chase size(mm) | 780x530 |
Height of cutting rules(mm) | 23.8 |
Inter-platen distance(mm) | 51.5 |
Max. pressure (N) | 120x104 |
Stock range | Min. Sheet 90g/㎡, Cardboard 157-2000g/㎡，E、B flute |
Min. gripper margin(mm) | 6 |
Max. machine speed(s/h) | 5500 |
Max. Stamping speed(s/h) | 5000 |
The thickness of stamping plate(mm) | 5(optional 4+1) |
Longitudinal feeding shafts | 3 |
Transversal feeding shafts | 2 |
Feeding pile height(mm) | 1200 |
Delivery pile height(mm) | 1100 |
Electric heating system | 8 zones |
Min. foil width(mm) | 40 |
Foil reel core(mm) | 25(1〃) 76（3〃） |
Rated power(kw) | 26 |
Air supply | 0.8-1.0MPa, ≥0.6m³/min |
Overall dimension(mm) | 3855x3650x2210 |
Weight of machine(kg) | 8500 |
3.Units of the equipment
● Complete lost -sheets control throughout the entire machine
● One pro-face self diagnostic touch screen for die cutting functions
● One pro-face touch screen for hot stamping functions CE certified
● CE standard safety systems for safe operation
● Emergency stop at arm length
Features:
1. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting
2. Two horizontal, cross pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy
3. Air blast system helps to separate foil from stock on critical jobs
4. Micrometer adjustment on side guide and front guide
5. Adjustable dwell on impression
6. Honeycomb base is convenient for loading
7. Missed sheet detector
8. 4 heating zones with digital control
9. 24 hours preheating device
10. Control system with touch screen HMI, PLC and servo system.
1)Feeder
● Air blower pressing foot at feeder head
● Two lift and Two forward suckers with angle adjustment
● Non-stop feeder with automatic pile lift
● Side adjustment of pallet table by handwheel
● Electrical double sheet control
● Feeding speed adjusting device
● Three-line system on feeding table for purpose of synchronizing between feeder and main unit for different sheet size. The changeover is realized by means of three-gear mechanism.
● Side lays on both sides push and pull changeable
● Four individually adjustable front lays.
● Four electronic front lay controls by means of four photoelectric sensors
● Upper and lowest position limit switch for feeding pile
2)Die cutting Section
● Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement
● Precision stationery upper platen
● Optional 4+1m cutting plate
● Chase locking by hand
● Pneumatic clutch/brake for main drive system
● Motorized automatic impression adjustment
● high precision alloy gripper bar
● Reasonable gap on two ends of gripper bar to realize good gripper bar registration at positions of gripping sheet and before die cutting by means of front and back clamper-lays.
● High quality gripper bar driving chain
● State-of-the-art 2 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement
● Torque limit safety clutch to protect the index driving system in case of gripper bar crash
● Double cam driven gripper opener and front lay swing frame with position restore spring for smooth and accurate sheet register and take off
● Air blasting nozzle bar for stretching the thin paper before die cutting
3)Foil Stamping System
§ Five servo motor driven foil pulling shafts each individually programmable for short and long foil stepping. 3 shafts in longitudinal directions; 2 shafts in transversal direction.
§ Stamping console with industrial pc, Pro-Face touch screen and 8 thermometers for foil setting and temperature control with machine pre-heating timer
§ To 3 foil pulling shafts in longitudinal direction, waste foil is rewound through three tension adjustable torque motors
§ To 2 foil pulling shafts in transversal direction, waste foil is rewound by means of timing belts driven by foil pulling servo motors
§ Heating base with 8 heating zone each temperature individually adjustable
§ 24 hours preheating device
§ Warning system for foil length
§ Foil separating air blaster with air volume, blasting strength per zone and starting and ending time adjustment
§ Thin paper stretching air blaster with air volume, blasting strength per zone and starting and ending time adjustment
4)Delivery Section
● Non-stop delivery by means of steel barrier. This barrier moves into the delivery to catch the arriving sheets during the pile exchange
● Air blower bar to press down the sheets
● Rare and side joggers with easy position adjustment
● Main chain tensioning device
4.About our factory
EcooGraphix TDS790 is produced by the leading manufacture in China ,which has a long history more than 90years. It is the first factory to produce and supply the Die Cutting ,Foil Stamping and Automatic Gluing machines .There are thousands of Die Cutting Machines installed worldwide. And two units EcooGraphix TDS790 were installed in Hungary in 2017.
5.Installations:
6.Quality Control
Professional control department which is responsible for all the machines.
Full checking list including mechanical and electrical detection on the machine.
Strict standard for registration and over 24 hours non-stop running on each machine.
Follow the policy of ‘One person responsible for one machine’ ,‘Claim responsibility if machine has assemble problem’.
7.Service
All of our technicians have over 10-20 years experience.
Rich experience in installation, repairing and maintenance overseas.
After-sales staff Whatsapp/Wechat on line 24/7.
Guarantee to provide after-sales service for any machine for whole using life.
Hot Tags: automatic hot stamping and die cutting machine, China, suppliers, manufacturers, factory, customized, price, in stock
No Information
