Flexo Digital Plate Computer CTP Making Machine

                                                                       Flexo Photopolymer Digital Plate Computer CTP Making Machine

   Traditional flexographic plate making process
  The traditional flexographic plate making process is very cumbersome. It requires a series of steps such as making negative images, plate preparation, back exposure, front exposure, washing and development, drying, detackification, post-exposure, and plate inspection. It takes a lot of time. A lot of cost and time, and the process is cumbersome, the degree of automation is low, and it is easy to cause some plate making failures due to human negligence.

Flexo CTP Plate making process
  First, use a computer to create the graphics, images, text, etc. to be engraved. Then special computer imaging software will convert the graphic information of the original into executable relevant parameter data such as depth, size and shape for modulation of the laser beam. The control system then controls the movement of the laser beam according to the command. The laser acts on the surface of the material and uses the power of the laser to ablate graphic information into dots. After the ablation, the dot residues are processed by a special device.

Advantages of Digital Photopolymer CTP of flexo printing plates
(1) There is no need to dry and rinse, which saves a lot of money and reduces costs.
(2) Save plate making time
(3) The engraving quality is stable and easy to control, and there will be no printing plate expansion without plate washing.
(4) Eliminating a large amount of auxiliary equipment and reducing investment
(5) The engraving dots are sharper and steeper than traditional dots, and the dots are round. High contrast and small dot increase rate.
(6) The entire work process is fully digitalized, and the industrial process is greatly simplified. Quality control is also easier to achieve.