Digital Polymer Flexo Printing CTP Plate Washing Processor

                                                          Large Format Flexo Plate Processing All In One Machine 

                                                                                            Model: FP-1400

   The washing development of flexo printing plate is a key step in the flexographic plate-making process.

   The exposed plate is treated by developing solution to form a printable graphic area. The following is the specific process and equipment information:

  1.Developing and exposing process Development: Immerse the exposed flexo in the developer, and remove the photosensitive layer of the unexposed part to form a graphic area.

 2. Water washing: Wash the layout with clear water to remove residual developer and impurities.

3.Drying: Dry the layout completely by hot air or natural drying to prepare for subsequent printing. device type Full-automatic punching machine: it integrates the functions of developing, washing and drying, and supports temperature and speed regulation, such as  control system. ‌Semi-automatic equipment: it needs manual assistance, with low cost but limited efficiency. ‌ one Technical characteristics Type of developer: water-based, solvent-based or thermal development.

Different plates need to be matched with special developer. ‌ Environmental protection improvement: some equipment is equipped with wastewater recovery system to reduce chemical emissions.

   FP1400 is the All In One Combined Flexo CTP Processor, which can do back exposure,main exposure , washing ,drying ,detacking and so on. And the Flexo CTP is needed for Flexo Plate making(computer to plate).

6. Hot air circulation device, safety and more meeting specifications for plate-making.

7. Accurately reproduce the original colors and graphic, working steady.

 

Specification:

---

 

Model	FP 1400
Page size	Max. 1016mm*1219mm
Light	Philips UV lamp, wavelength 350-450nm
Net Weight	950kg
Machine Size (WxLxH)mm	2180x1770x1350
Power Supply	380V, 50-60 Hz, power Consumption:10KW

 

 

More Information:

---

 

Digital Flexo Plate Making Process--Using Flexo Plate CTP and All-in-one Flexo Plate Making Machine:

 

1. Back exposure

2. Laser drawing by Flexo CTP

3. Main exposure

4. Wash-out

5. Drying

6. Post-exposure

7. De-tacking

 

 

1.The whole machine is made of stainless steel and will never rust. The self-adhesive version of Velcro does not require double-sided tape. The transmission motor adopts the synchronous motor produced by the famous brand Suzhou Telecom Motor. The pure copper crank is wear- resistant, 304 stainless steel small shaft, full-bearing transmission, independent suspension, precise transmission, no noise, and durable.

2.Adopt imported original (Philips) special printing lamp, with stronger brightness, faster printing speed, better fine network cable reducibility, long lamp life, up to 2000H on average, and imported (Japan) diffuse reflection for air extraction The air suction film has good light uniformity. Sealed well, not easy to paste

3.Microcomputer fully automatic control, automatic memory data settings, no need to reset the power on, easy to use.

4.Fully automatic plate washing mechanism, automatic forward and reverse plate washing mode.

5.Imported nylon wire brush, good elasticity, corrosion resistance, no deformation, lifetime repair.

6.Constant temperature drying wind, strong wind, fast drying. The steel heating pipe is not repaired.

Machine features:

◇Multi-functional solvent-base Flexo plate making machine, allows for exposure, wash-out, drying and de-tacking.

◇AIO design, save space, suitable for Flexo CTP machine.

◇MPU central control panel makes operation easy.

◇Adopt imported UV Lamps and electronic ballast.

◇Strong vacuum device and sucking air plate.

◇Circle thermostatic air drying device assures.

Hot Tags: Digital Polymer Flexo Printing CTP Plate Washing Processor, China, suppliers, manufacturers, factory, customized, price, in stock