Chemical Free Offset Printing Aluminum Thermal CTP Plate
The ECOO-G thermal plate (developed on press) provides an environmentally conscious, chemical-free printing plate alternative. It can be directly utilized on the press machine after CTP exposure, eliminating the necessity for chemical treatment. This reduces labor expenditures, water treatment costs, and the requirement for developer tanks.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Model: ECOO-G
The ECOO-G thermal plate (developed on press)
provides an environmentally conscious, chemical-free printing plate alternative.
It can be directly utilized on the press machine after CTP exposure, eliminating the necessity for chemical treatment.
This reduces labor expenditures, water treatment costs, and the requirement for developer tanks.
Our ECOO-G Plate is comparable to Sonora XP and Agfa Azura!
1. INTRODUCTION OF ECOO-G
ECOO-G Print endurance: 100,000 impressions
Suitable for sheet-fed offset presses or high-speed rotary offset presses
Works with a range of conventional inks and fountain solutions, including alcohol alternatives
Not advisable to extend print capability through plate baking
2. ECOO-G HIGHLIGHTS
Operates on a non-ablative photosensitive process in reverse
Works seamlessly with top-tier industry equipment
Enables direct printing without further treatment following scanning with a thermal CTP platesetter
Ensures exceptional dot accuracy, reliable performance, and wide processing margins
Maintains latent image stability for at least one week post-plate production
Constructed with high-quality aluminum substrate and a unique coating composition
3. APPLICATION GUIDELINES FOR ECOO-G PRESS OPERATIONS
1. Remove all residual inks from the blanket.
2. Initiate the press machine, engage the water roller, and run for 30-40 seconds.
3. Activate the ink rollers for 20-30 seconds.
4. Load the paper and commence printing.
Remark: If steps 2 and 3 are extended, the paper will be wasted less.
| Plate Technical Specification | |
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High-grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on the press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wavelength | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention |
| from light, moisture, overheating, and high humidity | |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
Comparing With The Plate Of Kodak Sonora XP
| Features | ECOO-G | Kodak Sonora XP |
| Sensitive wavelength(nm) | 800-850 | 800-850 |
| Coating color | Light green | Light green |
| Sensitivity (mj/cm2 ) | 150 | 150 |
| Exposure in safe light | White light 1 hour; yellow light 24 hours | White light 1 hour; yellow light 24 hours |
| After image contrast | Can be spotted by eyes, but auto punching machine cannot recognize it |
Can be spotted by eyes, but auto punching machine cannot recognize it |
| Imaging device | Normal thermal CTP device 1-99% @ 200lpi | Normal thermal CTP device 1-99% @ 200lpi |
| Resolution | 1-99% @ 200lpi (dependent on CTP capability) |
1-99% @ 200lpi (dependent on CTP capability) |
| Run-length | 100,000 | 100,000 |
| Storage | 12 months (under recommended environment) | 12 months (under recommended environment) |
Applied Parameters in Imaging Device
| Data | Kodak trendsetters |
LOTTE 400(TH1.7) |
MAGNUS 400 | Screen 8600S |
| Laser power | 15- 17W | 300-320mw | 19.5-21.5W | 80-90 % |
| Drum speed | 250-300rpm | 850-900rpm | 400-450rpm | 800-900rpm |
| Resolution | Customized | Customized | Customized | Customized |
| Parameter that | Focus/ | Focus/ | Focus/ | Focus/ |
| need set up | Zoom | Zoom | Zoom | Zoom |
Production and Packing
Material Warehouse:
Exclusively sourced from South Western Aluminum, renowned for their superior aluminum rolls, guaranteeing top-notch substrate quality.
Global Leading Production Facility:
Extending over a length of 240 meters, with a speed of 40 meters per minute.
Three Steps QC Control
Workflow
Certifications
Hot Tags: Chemical Free Offset Printing Aluminum Thermal CTP Plate, China, suppliers, manufacturers, factory, customized, price, in stock
