Offset Printing Thermal Negative Processless Plate
EcooGraphix Ecoo-G is a new, environmentally friendly, Development On Press CTP plate.
It can be run directly on a printing press after imaging, without a need for chemical processing.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Offset Printing Thermal Negative Processless Plate
Our latest technology, Ecoo-G thermal plates are a true process-less thermal plate technology, eliminating the need for chemistry and or additional equipment removing further energy requirements whilst maintaining optimum printing results to our valued customers world wide and protecting the environment.
Product Description:
1. Introduction of plates:
-It is double layer plate: emulsion layer is on the aluminum, and protection layer is above emulsion layer.
-The emulsion layer is negative photopolymerization /cross-link, can be exposed by 800-850nm wave-length. So all the known thermal CTPs (can expose normal thermal plate) on the market can expose this plate, only set up the exposure parameter to "negative".
-The protection layer is water-soluble polymer.
It is mainly used to protect the emulsion layer high sensitivity (low exposure energy required), and from damaging as well. Therefore, it is important to keep the plate away from any water, steam or even sweat materials.
2. Recommended application to press procedures of ECOO-G:
-Clean all the inks on the blanket;
-Start the press machine, apply the water roller, run 30-40 seconds;
-Apply the ink rollers 20-30 seconds;
-Apply the paper and start print.
Remark: If operate step 2 and 3 longer, paper will be wasted less.
Specification:
| Plate Technical Specification | |
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wave length | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
FAQ:
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q5: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
Hot Tags: offset printing thermal negative processless plate, China, suppliers, manufacturers, factory, customized, price, in stock
