CTP Sheetfed Plate Bending And Hole Punching Machine

Offset Printing CTP PS Aluminum Plate Hole Punching and Bending Machine

 

Application

The automatic online punching and bending machine is suitable for all web offset presses including Commercial Heatset and Newspaper presses, with CCD register camera.

 

Features

Fully automatic optical registration, plate punching and transport for online connection to CTP systems.

Register punching and transport configurations according to customer's specifications

Durable punching tool (made of SKD-11 steel) for longer operation giving precise register (pin) holes, trim corner, and U-cuts

Exact register positioning of offset plates by high quality video CCD cameras searching for register marks

 

Operation table with vacuum securing system

Integrated solution for programming, electronic, and mechanical co

 

 

 

Plate Type	Pre-Sensitized Aluminum Plate/CTP Plate L =1055mm X 811mm S =505mm X 340mm
Bending Mode	Double Side Bending
Electrical Requirements	( AC100~240V Single Phase 50/60HZ )
Weight	100 kg
Air Pressure Requirements	3 Bar
Machine Dimension	1170 × 1430 × 1120 mm (L × W × H)
Machine Color	White (Tarng Yun Reference)

 

 

Buyer need to prepare before installation:

 

1. Customer should prepare tools:

Lift truck and driver: to unload the machine, truck fork should be 1.5Ton or above capacity, 1.2m or longer arm;

 

2. CTP working environment:

Temperature: 15℃-30℃ (an air-conditioner is recommended)

Humidity: RH10%-70%, Non-condensing

Atmosphere: No smoke, No corrosive gases, Ash<0.1mg/M3.

Lighting: Natural illumination, no direct sunlight

Floor: The floor should bear the pressure of 500kg/m2. Anti-static floor or tile floor.

Ventilation: natural ventilation

Thermometer and hygrometer (pointer type or digital type) should be kept in the center of the room.

 

3. Power supply:

CTP Ecoosetter Series: single phase, independently grounded, less than 3Ω; 50/60Hz, 4KVA.

An online uninterrupted power supply(UPS) unit is required, and the battery should be able to sustain at least 5 minute alone.

 

4. Other equipment customer should prepare:

Computer: one computer is required to control the CTP. Configuration: I3 or above, 500G or above, Windows 7/8/10, English operation system (US);

Air: separated air-compressor or central air. ≥0.8Mpa, ≥175L/min. If separated air-compressor, the air tank should be ≥30L.

Processor

Plate and chemicals

Plate dot measurement tools (Replate or IC plate)

 

5. Workflow

RIP: customer should have workflow to generate 1-bit-tiff file. Ecoosetter CTP has program to receive 1-bit-tiff file.

 

Installation Cases of EcooGraphix T800A Online System

Hot Tags: CTP Sheetfed Plate Bending And Hole Punching Machine, China, suppliers, manufacturers, factory, customized, price, in stock