Processless Offset Printing Aluminum Thermal CTP Plate

Model: ECOO-G

 

ECOO-G thermal plate (developed on press) environmental-friendly processless printing plate.
-Run on press machine directly after CTP exposing, no need for chemistry processing
-Saves the cost of labor, water treatment, and developer tank

Our ECOO-G Plate is the same as Sonora XP and Agfa Azura!

1. INTRODUCTION OF ECOO-G
-Run length: 100,000 impressions
-Suitable for sheet-fed offset press or high-speed rotary offset press
-Suitable for different types of traditional inks and fountain solutions, including alcohol substitutes as fountain solutions
-Unsuitable to improve run length by baking plates

 

2. CHARACTERISTICS OF ECOO-G

-Negative non-ablation photosensitive system

-Compatible with the dominant devices in the market
-Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter

-Good dot reproduction, stable performance, wide processing latitude

-Long stability of the latent image, which can be stored at least a week after plate-making

-High-quality aluminum substrate, professional coating formulation

 

 

3. RECOMMENDED APPLICATION TO PRESS PROCEDURES OF ECOO-G

1. Clean all the inks on the blanket;
2. Start the press machine, apply the water roller, run 30-40 seconds;

3. Apply the ink rollers 20-30 seconds;

4. Apply the paper and start print.

 

Remark: If steps 2 and 3 are extended, the paper will be wasted less.

 

4.Certification

 

5.FAQ

1. How long is the lead time?
-The lead time is normally 45 days.

2. Do you offer free plate samples?
-Yes, we offer free testing samples maximum 12 pcs for each size but with delivery fee to collect.

3. How do you guarantee stable quality?
-There are 3 inpecting procedures: 1, automatic on-line 24h scanning detector; 2, random sampling per 15 mins at the producing line; 3, manually full inspection before packing. The production is mature. It is not a new product to us.

4. Do you have accompanying plate making products to enable one-stand easy purchase for some end users?
-Yes. CTP machine, processors, violet plate, CTP-CTCP plate, chemistry(fountain solution, roller wash, etc.) are all available to make your purchase more easily.

5. Payment term?
-Normally, 30% deposit, 70% before shipping, or LC at sight.

6. Is refrigerating container necessary for shipment?
-No. The plate is relatively stable and mature. So normal container is enough unless some ertreme hot situations.

7. How to use this processless plate?

Clean all the inks on the blanket;

Start the press machine, apply the water roller, run 15-20seconds;

Apply the ink rollers 20-30 seconds;

Apply the paper and start print.

 

Plate Technical Specification
Model	ECOO-G
Plate Type	Non-ablation thermal-negative type
Application	High-grade commercial and newspaper printing
Substrate	Electrolyte graining and Anodized AL substrate
Thickness	0.15mm / 0.30mm
Spectrum scope	800-850nm
Platesetter	Various dominant thermal platesetters in the market
Low-energy imaging	130-150 mj/ m²
The period of latent image stabilization	≤7 days
Recommended screen method	1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up	<50 sheets
Safety light	4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Processing	Without processing, directly on the press
Run Length	100,000 impressions, actual run length depends on printing conditions
Baking	No recommended
Maximum short grain width	Maximum width 1280 mm
Photosensitive wavelength	830 nm
Coating color	Grey
Shelf life	12 months under recommended condition
Transportation	Packed in seal and stored by means of prevention
	from light, moisture, overheating, and high humidity
Storage	Recommended condition: 18ºC-24ºC, 40%-50% RH.

 

Comparing With The Plate Of Kodak Sonora XP

Features	ECOO-G	Kodak Sonora XP
Sensitive wavelength(nm)	800-850	800-850
Coating color	Light green	Light green
Sensitivity (mj/cm2 )	150	150
Exposure in safe light	White light 1 hour; yellow light 24 hours	White light 1 hour; yellow light 24 hours
After image contrast	Can be spotted by eyes, but auto punching machine cannot recognize it	Can be spotted by eyes, but auto punching machine cannot recognize it
Imaging device	Normal thermal CTP device 1-99% @ 200lpi	Normal thermal CTP device 1-99% @ 200lpi
Resolution	1-99% @ 200lpi (dependent on CTP capability)	1-99% @ 200lpi (dependent on CTP capability)
Run-length	100,000	100,000
Storage	12 months (under recommended environment)	12 months (under recommended environment)

Applied Parameters in Imaging Device

Data	Kodak trendsetters	LOTTE 400(TH1.7)	MAGNUS 400	Screen 8600S
Laser power	15- 17W	300-320mw	19.5-21.5W	80-90 %
Drum speed	250-300rpm	850-900rpm	400-450rpm	800-900rpm
Resolution	Customized	Customized	Customized	Customized
Parameter that	Focus/	Focus/	Focus/	Focus/
need set up	Zoom	Zoom	Zoom	Zoom

 

 

Producing and Packing

 

Material Warehouse:
Only use South Western Aluminum, the Best quality aluminum roll manufacturer.
This ensures the plate substrate quality.

 

Worldwide Top Standard Production Line:
240meters long, 40meters per minute

 

Three Steps QC Control

 

 

Workflow

 

 

More details

 

 

 

Hot Tags: processless offset printing aluminum thermal ctp plate, China, suppliers, manufacturers, factory, customized, price, in stock