High Speed Paper Box Folder Gluer

Automatic Folder Gluer with 4/6 Corner

Model: LG800C(except spray glues system)

Automatic carton folding gluing machine (LG800) is a very stable high-volume machine that can bring more profits to customers.

It has a 4/6 corner function. Each set is controlled by an independent motor. It uses ESC, PLC, imported electronic components, and three-board tracking mode equipment.

Main Features

1) The whole machine adopts the structure of laser-cut steel plates.

2) Glue-spraying system (three guns and three sensors) optional.

3) Inner couriers in the machine are adjusted by motors.

4) Plasma system optional.

5) Processing data of boxes can be saved in the computer control system (optional).

6) Position indicator (optional)

7) Variable adjustment.

8) Long-distance pre-folding section, 180° folding for the first line, 135°folding for the third line, they are easily open after pre-folded.

Specification:

Paper size

◆ straight line box W×L: max 800×800 mm min 90×60 mm

◆ lock bottom box W×L: max 700×800 mm min 150×60 mm

Feeder

◆ MIKI-pulley infinite speed variator 1/set.

◆ Independent adjust feeding belt, ensure the smoothly paper feeding.1set/6pcs,size: 1026*30*8mm

◆ Independent motor, inverter adjust speed, effectively ensure the balance of paper spacing.

◆ Paper carry rod with high performance Taiwan-made vibrating motor.

◆ Air feeding device.(optional)

Alignmentunit

◆ Aligning the askew paper wihch from feeder, make sure the paper running in straight line.

◆ Alignment unit can be adjusted up and down, suitbale for different thickness paper stably.

◆ correct the paper, avoiding the paper going to two sides.

Two belts: 2145*34*4mm

Pre-folding unit

◆ 2 plate conveyor belt structure, segmenting left and right upper belt plate can be adjusted according to product demand, fast and efficient.

◆ three long top courier in this section, 180 degree folding could be preformed

Nitta belts :1 set

specifications:1985*24*3mm-2pcs 3375*24*3mm-2pcs

5000*44*4mm-1pcs 5000*24*4mm-1pcs 4755*30*4mm-1pcs

Crash-lock unit

◆ 3 plate conveyor belt board structure, segmental upper belt board function is the same as the prefolding part, eliminate the problems in the production of special-shaped box products effectively.

◆ The upper and middle belt board is detachable, depending on product requirements for disassembly and debugging.

◆ Nitta belts 1set /9 pcs

Specification:

1985*24*3mm-2pcs 3375*24*3mm-1pcs

1780*24*3mm-2pcs 3450*24*4mm- 3pcs

3610*30*4mm-1pcs

◆ Safety door (Optional)

Gluingunit

◆ The mechanical lower pasting cylinder is designed with separate type of rubber wheel and rubber cylinder, high speed, easy to clean and maintain.

◆ Crashlock, 4/6 corner box ,etc need to equip eletrical spray guns. (recommend 3 or more guns)

◆ width of gluing wheel 4MM (standard), other width could be customized

Folding unit

◆ 2 plate conveyor belt board structur.

◆ The left and right outside folding belt speed can be adjusted independently to ensure the molding accuracy.

◆ Wide box type can be matched with middle upper and lower belt plate to ensure stable transportation.

◆ Nitta belts 1set /8pcs

Specification:

2785*24*3mm-1pcs 4565*24*3mm-1pcs

3175*24*3mm-1pcs 7320*34*4mm-3pcs

7520*35*4mm-2pcs

Pressing unit

◆ Independend inverter adjust speed, proportional linkage to main engine under automatic model, adjusting separately with the same speed as the main engine under manual.

◆ Upper and lower belt telescopic adjustment is simple and easy to operate.

◆ Equipped with high speed electronic kick counter.

Transportation unit

◆ In automatic mode, the paper box spacing is set. The pressure belt speed is connected with the belt speed of the main engine in proportion. When photoelectric monitoring the paper box, the leather moves.

◆ In manual mode, the pressure belt is delivered at a constant speed, which is not affected by the machine speed.

◆ The pressure part adopts the pressure type pressing, the pressure control is more accurate, the product bonding effect is more guaranteed.

4/6 corner function (Optional)

◆ All types and most sizes of 4/6 corner boxes can be quickly set up.

◆ the inclined frame according to the page size of the paper box adjustable.

◆ 45 degrees guide plate, suitable for all the size of the paper box.

◆ modular folding hook running track, high speed and high quality production.

Electrical and drive systems

◆ Schneider brand inverter is used to realize synchronous speed regulation of the main engine, making the speed change, adjustment, stability and reliability.

◆ Humanized design of hd touch screen, fully consider the operator's convenience.

◆ Schneider brand PLC is adopted, and a number of safety protection devices are added, making the operation of the machine more safe and reliable.

◆ Control panel, layout more reasonable, icon prompt, simple and easy to understand with remote control switch, make the operation more convenient.

Main parts list

1.Electrical part

2.Belt

3.Pneumatic element

BOX SAMPLES

Hot Tags: High Speed Paper Box Folder Gluer, China, suppliers, manufacturers, factory, customized, price, in stock