Offset Printing Plate Single Layer UV-CTP Plate
EcooGraphix CTCP Plate can be used for long runs high grade commercial and newspaper printing. Unique production technology and high quality raw materials make the plate gain high photosensitive speed, good half-tone dot reproduction and stable performance.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Offset Printing Plate Single Layer UV-CTP Plate
Model: Ecoo-CTCP-ES
Product Parameter:
|
Plate Type |
Positive CTCP Plate |
|
Application |
High grade commercial and newspaper printing |
|
Substrate |
Electro chemically Grained and Anodized lithographic Aluminum |
|
Coating |
Single-layer system ,IR sensitive, positive acting |
|
Gauge |
0.15,0.20,0.25,0.30,0.40(mm) |
|
Maximum short grain width |
Maximum width 1280mm |
|
Length of run |
Unbaked:80,000 to 100,000 impressions Baked: Over 100,000 impressions |
|
Plate setters |
Luscher, Basysprint, Cron, EcooGraphix |
|
Exposure energy |
50-70 mj/cm² |
|
Spectral Sensitivity |
400-430 nm - UV Laser |
|
Resolution |
2-99% at 200 LPI |
|
Photosensitive Wave Length |
405nm |
|
Image color |
Blue |
|
Processor |
All the kind brands |
|
Developer |
Any CTCP Plate developer or our own developer |
|
Processing temperature |
23℃+/-2℃ |
|
Developing time |
25-30 sec |
|
Processing Speed |
0.80-1.20 m/min |
|
Safelight |
Handle under yellow safelight (UV free) |
|
Shelf life |
12 months under recommended storage conditions |
|
Packaging |
Available in all standard formats, including bulk packaging options, such as APL packaging |
|
Storage and handling |
Stored in a cool and dry environment, away from excessive cold, heat and humidity |
Detailed photos:
|
Plate Type |
ECOO-V |
|
Features |
Negative-working, low-chemical violet plate, also can work as normal violet plate |
|
Application |
Newspaper/Commercial Printing |
|
Substrate |
Electrochemically grained and anodized aluminum substrate |
|
Gauge |
0.20/0.25/0.30mm |
|
Plate-setter |
Existing mainstream 405nm violet plate-setter, All the main brands in market,like Agfa/FFEI&FUJI/ Krause/ECRM/Highwater/Escher-Grad/Dotline |
|
Processor |
Existing conventional violet processors and low-chemical violet processors. Recommended: Glunz&Jensen Raptor,Height inca/maya etc. |
|
Developer |
FUJI LP. DWS. Agfa PL. 10. IMAF NEGA 910; PVD gum |
|
Processing |
Preheat temp setting 90-100℃(plate surface temp) For FUJI LP-DWS: Developer temperature 25-26℃/Dwell time 16-17 seconds For Agfa PL-10: Developer temperature 24℃/Dwell time 17 seconds |
|
Run Length |
More than 150,000 impressions. Actual run length may vary according to press/paper/ink conditions |
|
Laser energy |
70-80 μj/cm² |
|
Resolution |
3% to 97% @ 175 lpi under calibration |
|
Safe light |
For manual handling and platesetting loading, darkroom conditions with G10 safelight is required. |
|
Shelf life |
12months under recommended storage conditions |
|
Storage |
Temperature: 18-26℃ Relative humidity: 30-70% RH |
|
Advantages |
Environment-friendly------help enterprises to develop Stable developing performance, compatible with various kinds of developers Reduce equipment investment and maintenance cost |
Hot Tags: offset printing plate single layer uv-ctp plate, China, suppliers, manufacturers, factory, customized, price, in stock
